1500W Handheld Fiber Laser Welding Machine
Product Description
• This 1500W fiber laser welding machine adopts continuous laser
sourse. It is suitable for precise welding on iron, gold, silver,
nickel, tin, copper, aluminum, stainless steel and other different
metals. It has been widely used in aviation equipment, ship
building, instrumentation, mechanical and electrical products,
automobile manufacturing and other industries.
• This fiber laser welder is composed of welding held, laser source
cabinet, water cooling machine and control equipment. This series
of equipment has multiple powers to choose from, from 500W to
2000W, which is 3-5 times of the speed of the traditional welding
methods. It can completely meet the needs of users in different
industries.
Product Parameters
| Laser Power | 1500W |
| Laser Type | Continuous fiber Laser |
| Laser Wavelength | 1064nm |
| Fiber Cable Length | Standard: 10 Meters |
| Working Mode | Continuous / Modulation |
| Welding Speed Range | 0-120mm/s |
| Working Environment Temperature Range | 15℃ - 35℃ |
| Working Environment Humidity Range | ＜70% No Condensation |
| Recommend Welding Thickness | 0.5mm - 3mm |
| Welding Gap Requirement | ≤0.5mm |
| Working Voltage | 110V / 220V |
| Weight (KG) | 230 KG |
| Cooling Method | Water Cooling |
| Laser Type | Continuous fiber Laser |
| Package Size | 80X92X120(cm) |
Product Details
| Laser source has better absorb rate for mental materials.
The lifespan is 100,000 hours. It has no maintenance, good laser
beam quality, stable performance, easy to control, which means the
better welding result is guaranteed.
Smaller size, lower power consumption, higher light-electricity
exchange rate. |
| Touch screen and simple interface make it easy to set parameters.
Most of our customers can learn to operate it by less than 2-hours’
guidance.
The software is built in more than 15 languages, including Chinese,
English, Korean, French, Japanese, Hungarian, Russian, Spanish,
Polish, Czech, Slovak, German, Finnish, Norwegian and Greek and so
on. |
| Independent R&D of swinging welding joint makes up for the
defect of micro-facula in laser welding, expands the tolerance
range and weld width of mechanical parts, and then obtains a better
weld seam. Smooth and fine welding shall reduce the subsequent
gringding/ polishing process, saving the time and cost. |
Application
The importance of laser welding equipment in the application of
electronic products
• In recent years, with the rapid development and upgrading of
electronic, electrical and digital products, more and more
important parts of electronic products begin to go toward the trend
of miniscule production. High precision processing mode demand is
increasing, as a new technology of precision welding process, laser
welding technology ushers in a rapid development. Compared with
iron soldering process, the laser welding technology is more
advanced, and the heating principle is different from the former.
It is not simply to replace the heated part of the welding metal.
The laser belongs to the "surface exothermic", and the heating
speed is very fast.
The necessity of laser welding equipment application:
• With the improvement of IC (Integrated Circuits) chip design and
manufacturing Technology, SMT (Surface Mounting Technology) is
developing towards the direction of high density, high reliability
and miniaturization. Therefore, it also challenges the traditional
welding method, and the new laser welding would become a new weapon
in the welding field.
• At present, the pin center distance of QFP (Quad Flat Package)
has reached 0.3mm, and the number of pins of a single device can
reach more than 576. This makes the "bridging" of adjacent lead
welding joints easily occur in the traditional welding methods such
as gas phase reflow welding, hot air reflow welding and infrared
reflow welding when welding such fine-spacing components.
• In addition, in the field of traditional wire welding, the
progress of IC technology, from the other hand, promotes the
process and technology development of wire processing. For example,
in the field of traditional connectors, the further reduction of
PCB and terminal sizes have caused bottlenecks in traditional Hot
Bar welding and electric soldering. In addition, due to the
traditional contact welding processes such as HOT BAR welding and
electric soldering iron welding, there are hidden dangers of damage
to wire and transmission performance. In the field with high demand
on wire transmission quality and speed, manufacturers try to avoid
using these welding methods.
• At the same time, the emergence of some new MEMS devices, such as
mobile phone camera module, makes the welding of electronic
components get rid of the traditional concept of plane welding and
develop towards the direction of 3D space welding. For such
devices, contact processing methods such as electric iron welding
are easy to produce interference, so non-contact and high-precision
processing methods are required. As a result, more and more people
are studying new welding method. Among them, laser welding
technology with its unique heat source properties, extremely fine
spot size, local heating characteristics, help solve this kind of
problem to a large extent. Therefore, it has been paid more and
more attention by manufacturers.
